CCIE Routing And Switching At Ahmedabad

CCIE Routing & Switching Written Exam Topics v4.0 (Blueprint)Exam Sections and Sub-task Objectives1.00 Implement Layer 2 Technologies √1.10 Implement Spanning Tree Protocol (STP)(a) 802.1d(b) 802.1w(c) 801.1s(d) Loop guard(e) Root guard(f) Bridge protocol data unit (BPDU) guard(g) Storm control(h) Unicast flooding(i) Port roles, failure propagation, and loop guard operation1.20 Implement VLAN and VLAN Trunking Protocol (VTP)1.30 Implement trunk and trunk protocols, EtherChannel, and load-balance1.40 Implement Ethernet technologies(a) Speed and duplex(b) Ethernet, Fast Ethernet, and Gigabit Ethernet(c) PPP over Ethernet (PPPoE)1.50 Implement Switched Port Analyzer (SPAN), Remote Switched Port Analyzer (RSPAN), and flow control1.60 Implement Frame Relay(a) Local Management Interface (LMI)(b) Traffic shaping(c) Full mesh(d) Hub and spoke(e) Discard eligible (DE)1.70 Implement High-Level Data Link Control (HDLC) and PPP2.00 Implement IPv42.10 Implement IP version 4 (IPv4) addressing, subnetting, and variable-length subnet masking (VLSM)2.20 Implement IPv4 tunneling and Generic Routing Encapsulation (GRE)2.30 Implement IPv4 RIP version 2 (RIPv2)2.40 Implement IPv4 Open Shortest Path First (OSPF)(a) Standard OSPF areas(b) Stub area(c) Totally stubby area(d) Not-so-stubby-area (NSSA)(e) Totally NSSA(f) Link-state advertisement (LSA) types(g) Adjacency on a point-to-point and on a multi-access network(h) OSPF graceful restart2.50 Implement IPv4 Enhanced Interior Gateway Routing Protocol (EIGRP)(a) Best path(b) Loop-free paths(c) EIGRP operations when alternate loop-free paths are available, and when they are not available(d) EIGRP queries(e) Manual summarization and autosummarization(f) EIGRP stubsThe comprehensive CCIE R&S Written Exam (#350-001) has 100 multiple-choice questions and is two hoursin duration. The topic areas listed are general guidelines for the type of content that is likely to appear on theexam. Please note, however, that other relevant or related topic areas may also appear.2.60 Implement IPv4 Border Gateway Protocol (BGP)(a) Next hop(b) Peering(c) Internal Border Gateway Protocol (IBGP) and External Border Gateway Protocol (EBGP)2.70 Implement policy routing2.80 Implement Performance Routing (PfR) and Cisco Optimized Edge Routing (OER)2.90 Implement filtering, route redistribution, summarization, synchronization, attributes, and other advancedfeatures3.00 Implement IPv63.10 Implement IP version 6 (IPv6) addressing and different addressing types3.20 Implement IPv6 neighbor discovery3.30 Implement basic IPv6 functionality protocols3.40 Implement tunneling techniques3.50 Implement OSPF version 3 (OSPFv3)3.60 Implement EIGRP version 6 (EIGRPv6)3.70 Implement filtering and route redistribution4.00 Implement MPLS Layer 3 VPNs4.10 Implement Multiprotocol Label Switching (MPLS)4.20 Implement Layer 3 virtual private networks (VPNs) on provider edge (PE), provider (P), and customeredge (CE) routers4.30 Implement virtual routing and forwarding (VRF) and Multi-VRF Customer Edge (VRF-Lite)5.00 Implement IP Multicast5.10 Implement Protocol Independent Multicast (PIM) sparse mode5.20 Implement Multicast Source Discovery Protocol (MSDP)5.30 Implement interdomain multicast routing5.40 Implement PIM Auto-Rendezvous Point (Auto-RP), unicast rendezvous point (RP), and bootstrap router(BSR)5.50 Implement multicast tools, features, and source-specific multicast5.60 Implement IPv6 multicast, PIM, and related multicast protocols, such as Multicast Listener Discovery(MLD)6.00 Implement Network Security6.01 Implement access lists6.02 Implement Zone Based Firewall6.03 Implement Unicast Reverse Path Forwarding (uRPF)6.04 Implement IP Source Guard6.05Implement authentication, authorization, and accounting (AAA) (configuring the AAA server is notrequired, only the client-side (IOS) is configured)6.06 Implement Control Plane Policing (CoPP)6.07 Implement Cisco IOS Firewall6.08 Implement Cisco IOS Intrusion Prevention System (IPS)6.09 Implement Secure Shell (SSH)6.10 Implement 802.1x6.11 Implement NAT6.12 Implement routing protocol authentication6.13 Implement device access control6.14 Implement security features7.00 Implement Network Services7.10 Implement Hot Standby Router Protocol (HSRP)7.20 Implement Gateway Load Balancing Protocol (GLBP)7.30 Implement Virtual Router Redundancy Protocol (VRRP)7.40 Implement Network Time Protocol (NTP)7.50 Implement DHCP7.60 Implement Web Cache Communication Protocol (WCCP)8.00 Implement Quality of Service (QoS)8.10 Implement Modular QoS CLI (MQC)(a) Network-Based Application Recognition (NBAR)(b) Class-based weighted fair queuing (CBWFQ), modified deficit round robin (MDRR), and low latencyqueuing (LLQ)(c) Classification(d) Policing(e) Shaping(f) Marking(g) Weighted random early detection (WRED) and random early detection (RED)(h) Compression8.20 Implement Layer 2 QoS: weighted round robin (WRR), shaped round robin (SRR), and policies8.30 Implement link fragmentation and interleaving (LFI) for Frame Relay8.40 Implement generic traffic shaping8.50 Implement Resource Reservation Protocol (RSVP)8.60 Implement Cisco AutoQoS9.00 Troubleshoot a Network9.10 Troubleshoot complex Layer 2 network issues9.20 Troubleshoot complex Layer 3 network issues9.30 Troubleshoot a network in response to application problems9.40 Troubleshoot network services9.50 Troubleshoot network security10.00 Optimize the Network10.01 Implement syslog and local logging10.02 Implement IP Service Level Agreement SLA10.03 Implement NetFlow10.04 Implement SPAN, RSPAN, and router IP traffic export (RITE)10.05 Implement Simple Network Management Protocol (SNMP)10.06 Implement Cisco IOS Embedded Event Manager (EEM)10.07 Implement Remote Monitoring (RMON)10.08 Implement FTP10.09 Implement TFTP10.10 Implement TFTP server on router10.11 Implement Secure Copy Protocol (SCP)10.12 Implement HTTP and HTTPS10.13 Implement Telnet11.00 Evaluate proposed changes to a Network11.01 Evaluate interoperability of proposed technologies against deployed technologies(a) Changes to routing protocol parameters(b) Migrate parts of a network to IPv6(c) Routing Protocol migration(d) Adding multicast support(e) Migrate spanning tree protocol(f) Evaluate impact of new traffic on existing QoS design11.02 Determine operational impact of proposed changes to an existing network(a) Downtime of network or portions of network(b) Performance degradation(c) Introducing security breaches11.03 Suggest Alternative solutions when incompatible changes are proposed to an existing network(a) Hardware/Software upgrades(b) Topology shifts(c) Reconfigurations