CCNA (Cisco Certified Network Associate)

TNS Institute of Information Technology (TIIT)
In Hansi, Hisar, Sirsa and another venue.

Rs 10,000
You can also call the Study Centre
09310... More
Want to speak to an Advisor about this course?
Students that were interested in this course also looked at...
See all

Important information


CCNA training shall enable you to start off your career as a Network Engineer who can provide LAN and WAN network support to customers in a corporate setting. This program is an intensive and hands-on lecture experience that develops technical skills and knowledge about the effective operation and support of corporate network infrastructures.
Suitable for: CCNA is for individuals who are interested in building a future in networking domain on Cisco products. Network administrators, technicians, and anyone who needs to configure and support multiprotocol networks and get started with basic Cisco IOS software. CCNA Certification is the prerequisite for any Cisco Certification. If you want to reach a Professional or Expert level in the Cisco Career Certification tracks, Passing CCNA test is the first step.

Important information Venues

Where and when

Starts Location
On request
TNS Institue of Information Technology, DSS-761/18 Hissar Chungi, Near Moonlight Hotel, Haryana, India
See map
On request
TNS Institue of Information Technology, DSS No - 130 / 131 Near Congress Bhavan, Old Court , 125001, Haryana, India
See map
On request
TNS Institue of Information Technology, Shop No 1&2 Basement, Dutt residency, Opp Railway Stadium, 482001, Madhya Pradesh, India
See map
On request
TNS Institue of Information Technology, GEETA BHAWAN ROAD, FASHION CAMP WALI GALI, RODI BAJAR, Haryana, India
See map

Frequent Asked Questions

· Requirements

To attend this course you must have a basic knowledge of computer hardware and windows. Knowledge of Comptia N+ & MCP would be an added advantage.

Teachers and trainers (1)

Uttam Kr Pandey
Uttam Kr Pandey
Cisco Trainer

Course programme

640-802 CCNA® Exam Topics Exam Description. The 640-802 CCNA is the composite exam associated with the Cisco Certified Network Associate certification. This exam tests a candidate's knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network. The topics include connecting to a WAN; implementing network security; network types; network media; routing and switching fundamentals; the TCP/IP and OSI models; IP addressing; WAN technologies; operating and configuring IOS devices; extending switched networks with VLANs; determining IP routes; managing IP traffic with access lists; establishing point-to-point connections; and establishing Frame Relay connections. Describe how a network works

• Describe the purpose and functions of various network devices

• Select the components required to meet a network specification

• Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network

• Describe common networked applications including web applications

• Describe the purpose and basic operation of the protocols in the OSI and TCP models

• Describe the impact of applications (Voice Over IP and Video Over IP) on a network

• Interpret network diagrams

• Determine the path between two hosts across a network

• Describe the components required for network and Internet communications

• Identify and correct common network problems at layers 1, 2, 3 and 7 using a layered model approach

• Differentiate between LAN/WAN operation and features Configure, verify and troubleshoot a switch with VLANs and inter switch communications

• Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts

• Explain the technology and media access control method for Ethernet networks

• Explain network segmentation and basic traffic management concepts

• Explain basic switching concepts and the operation of Cisco switches

• Perform and verify initial switch configuration tasks including remote access management

• Verify network status and switch operation using basic utilities (including: ping, traceroute, telnet, SSH, arp, ipconfig), SHOW & DEBUG commands

•Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures

• Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)

• Describe how VLANs create logically separate networks and the need for routing between them

• Configure, verify, and troubleshoot VLANs

• Configure, verify, and troubleshoot trunking on Cisco switches

• Configure, verify, and troubleshoot interVLAN routing

• Configure, verify, and troubleshoot VTP

• Configure, verify, and troubleshoot RSTP operation

• Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network.

• Implement basic switch security (including: port security, trunk access, management vlan other than vlan1, etc.) Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network

• Describe the operation and benefits of using private and public IP addressing

• Explain the operation and benefits of using DHCP and DNS

• Configure, verify and troubleshoot DHCP and DNS operation on a router.(including: CLI/SDM)

• Implement static and dynamic addressing services for hosts in a LAN environment

• Calculate and apply an addressing scheme including VLSM IP addressing design to a network

• Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment

• Describe the technological requirements for running IPv6 in conjunction with IPv4 (including: protocols, dual stack, tunneling, etc).

• Describe IPv6 addresses

• Identify and correct common problems associated with IP addressing and host configurations Configure, verify, and troubleshoot basic router operation and routing on Cisco devices

• Describe basic routing concepts (including: packet forwarding, router lookup process)

• Describe the operation of Cisco routers (including: router bootup process, POST, router components)

• Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts

• Configure, verify, and troubleshoot RIPv2

• Access and utilize the router to set basic parameters.(including: CLI/SDM)

• Connect, configure, and verify operation status of a device interface

• Verify device configuration and network connectivity using ping, traceroute, telnet, SSH or other utilities

• Perform and verify routing configuration tasks for a static or default route given specific routing requirements

• Manage IOS configuration files. (including: save, edit, upgrade, restore)

• Manage Cisco IOS

• Compare and contrast methods of routing and routing protocols

• Configure, verify, and troubleshoot OSPF

• Configure, verify, and troubleshoot EIGRP

• Verify network connectivity (including: using ping, traceroute, and telnet or SSH)

• Troubleshoot routing issues

• Verify router hardware and software operation using SHOW & DEBUG commands.

• Implement basic router security Explain and select the appropriate administrative tasks required for a WLAN

• Describe standards associated with wireless media (including: IEEE WI-FI Alliance, ITU/FCC)

• Identify and describe the purpose of the components in a small wireless network. (Including: SSID, BSS)

• Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point

• Compare and contrast wireless security features and capabilities of WPA security (including: open, WEP, WPA-1/2)

• Identify common issues with implementing wireless networks. (Including: Interface, missconfiguration) Identify security threats to a network and describe general methods to mitigate those threats

• Describe today's increasing network security threats and explain the need to implement a comprehensive security policy to mitigate the threats

• Explain general methods to mitigate common security threats to network devices, hosts, and applications

• Describe the functions of common security appliances and applications

• Describe security recommended practices including initial steps to secure network devices Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network

• Describe the purpose and types of ACLs

• Configure and apply ACLs based on network filtering requirements.(including: CLI/SDM)

• Configure and apply an ACLs to limit telnet and SSH access to the router using (including: SDM/CLI)

• Verify and monitor ACLs in a network environment

• Troubleshoot ACL issues

• Explain the basic operation of NAT

• Configure NAT for given network requirements using (including: CLI/SDM)

• Troubleshoot NAT issues Implement and verify WAN links

• Describe different methods for connecting to a WAN

• Configure and verify a basic WAN serial connection

• Configure and verify Frame Relay on Cisco routers

• Troubleshoot WAN implementation issues

• Describe VPN technology (including: importance, benefits, role, impact, components)

• Configure and verify a PPP connection between Cisco routers

Achievements for this centre

Additional information

Comments: Our batch strength is quite less, so that we can do care for everyone
Work placements: for placement we have a dedicated cell, who search the jobs in market and arrange the interview for the candidates
Students per class: 8
Contact person: Miss Rajni Shukla

Students that were interested in this course also looked at...
See all