CCNA

IDENTIFY AND CORRECT COMMON NETWORK PROBLEMS AT LAYERS 1, 2, 3 AND 7 USING A LAYERED MODEL APPROACH

Differentiate between LAN/WAN operation and features

Configure, verify and troubleshoot a switch with VLANs and interswitch communications.

Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts.

Explain the technology and media access control method for Ethernet Networks.

Explain network segmentation and basic traffic management concepts.

Explain basic switching concepts and the operation of Cisco switches.

Perform and verify initial switch configuration tasks including remote access management

Verify network status and switch operation using basic utilities (including: ping, traceroute, telnet, SSH, arp, ipconfig),SHOW & DEBUG commands Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures.

DESCRIBE ENHANCED SWITCHING TECHNOLOGIES (INCLUDING: VTP, RSTP, VLAN, PVSTP, 802.1Q)

Describe how VLANs create logically separate networks and the need for routing between them Configure, verify, and troubleshoot VLANs.

Configure, verify, and troubleshoot trunking on Cisco switches, Configure, verify, and troubleshoot interVLAN routing, Configure, verify, and troubleshoot VTP, Configure, verify, and troubleshoot RSTP operation Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network.

Implement basic switch security (including: port security, trunk access, management vlan other than vlan1, etc.)

IMPLEMENT AN IP ADDRESSING SCHEME AND IP SERVICES TO MEET NETWORK REQUIREMENTS IN A MEDIUM-SIZE ENTERPRISE BRANCH OFFICE NETWORK

Describe the operation and benefits of using private and public IP addressing.

Explain the operation and benefits of using DHCP and DNS Configure, verify and troubleshoot DHCP and DNS operation on a router. (including: CLI/SDM) Implement static and dynamic addressing services for hosts in a LAN environment.

Calculate and apply an addressing scheme including VLSM IP addressing design to a network.

Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment.

Describe the technological requirements for running IPv6 in conjunction with IPv4 (including: protocols, dual stack, tunneling, etc).

Describe IPv6 addresses.

Identify and correct common problems associated with IP addressing and host configurations Configure, verify, and troubleshoot basic router operation and routing on Cisco devices Describe basic routing concepts (including: packet forwarding, router lookup process).

Describe the operation of Cisco routers (including: router bootup process, POST, router components).

Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts.

Configure, verify, and troubleshoot RIPv2 Access and utilize the router to set basic parameters. (including: CLI/SDM)

Connect, configure, and verify operation status of a device interface

Verify device configuration and network connectivity using ping, traceroute, telnet, SSH or other utilities.

Perform and verify routing configuration tasks for a static or default route given specific routing requirements

Manage IOS configuration files. (including: save, edit, upgrade, restore)

Manage Cisco IOS Compare and contrast methods of routing and routing protocols Configure, verify, and troubleshoot OSPF

Configure, verify, and troubleshoot EIGRP Verify network connectivity (including: using ping, traceroute, and telnet or SSH)

Troubleshoot routing issues Verify router hardware and software operation using SHOW & DEBUG commands. Implement basic router security.

EXPLAIN AND SELECT THE APPROPRIATE ADMINISTRATIVE TASKS REQUIRED FOR A WLAN

Describe standards associated with wireless media (including: IEEE WI-FI Alliance, ITU/FCC)

Identify and describe the purpose of the components in a small wireless network. (Including: SSID, BSS, ESS)

Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point

Compare and contrast wireless security features and capabilities of WPA security (including: open, WEP, WPA-1/2)

Identify common issues with implementing wireless networks. (Including: Interface, missconfiguration).

IDENTIFY SECURITY THREATS TO A NETWORK AND DESCRIBE GENERAL METHODS TO MITIGATE THOSE THREATS

Describe today's increasing network security threats and explain the need to implement a comprehensive security policy to mitigate the threats

Explain general methods to mitigate common security threats to network devices, hosts, and applications

Describe the functions of common security appliances and applications

Describe security recommended practices including initial steps to secure network devices.

IMPLEMENT, VERIFY, AND TROUBLESHOOT NAT AND ACLS IN A MEDIUM-SIZE ENTERPRISE BRANCH OFFICE NETWORK

Describe the purpose and types of ACLs Configure and apply ACLs based on network filtering requirements.(including: CLI/SDM).

Configure and apply an ACLs to limit telnet and SSH access to the router using (including: SDM/CLI) Verify and monitor ACLs in a network environment Troubleshoot ACL issues, Explain the basic operation of NAT Configure NAT for given network requirements using (including:CLI/SDM) Troubleshoot NAT issues.

IMPLEMENT AND VERIFY WAN LINKS

Describe the purpose and types of ACLs Configure and apply ACLs based on network filtering requirements. (including: CLI/SDM).

Describe different methods for connecting to a WAN Configure and verify a basic WAN serial connection

Configure and verify Frame Relay on Cisco routers Troubleshoot WAN implementation issues Describe VPN technology (including: importance, benefits, role, impact, components) Configure and verify a PPP connection between Cisco routers.