Certificate Swiss Army Knife of Videos on Engineering Skills - Free Courses (online)

JRD Global EDU
Online

Rs 12,700
VAT incl.
You can also call the Study Centre
91932... More

Important information

  • Course
  • Beginner
  • Online
  • Duration:
    4 Months
  • Online campus
Description

It is our silver anniversary in the training and education industry and we are celebrating it with you! Receive your exclusive and complimentary access to the IDC Technologies’ “Swiss Army Knife of Videos on Engineering Skills”. We have put together over 70 technical videos with more than 15 hours of practical tips and advice presented by highly industry-experienced instructors with decades of combined knowledge in the field. This unique toolkit has been carefully crafted to give you instant access to solid engineering and technical concepts essential in today’s competitive working environment.

Important information
Venues

Where and when

Starts Location Timetable

Online

Frequent Asked Questions

· Who is it intended for?

ANY STUDENTS WHO HAS PAASED 10TH STD CAN APLLY FOR THIS COURSE

· Requirements

ANY STUDENTS WHO HAS PAASED 10TH STD CAN APLLY FOR THIS COURSE

· Qualification

ANY STUDENTS WHO HAS PAASED 10TH STD CAN APLLY FOR THIS COURSE

· What marks this course apart?

ON LINE STUDY ON LINE SELF LEARNING PROGRAM

· What happens after requesting information?

APPLICATION DETAILS REGISTRATION DETAILS

What you'll learn on the course

Mechatronics and Remote Engineering - Robot Mechanics
Moment arm for robot

Teachers and trainers (1)

SNEHA SHARMA
SNEHA SHARMA
COUNSELOR

Course programme

Civil Engineering - Structural Design for Non-Structural Engineers

  • Civil Engineering - Structures and loads
    • Classification of structures
    • Kinds of loads and types of support reactions in structures
    • Stress in structural members
  • Civil Engineering - Mechanical properties of materials
    • Development of internal stresses
    • Flexural stresses in beams
  • Civil Engineering - Analysis of beam I
    • Slope deflection method
  • Civil Engineering - Analysis of beam II
    • Moment distribution method
    • Influence line diagram for statically indeterminate structures
  • Civil Engineering - Principles of Statically Indeterminate Structures
    • Influence line diagram
    • Muller-Breslau Principle
    • Principle of superposition
  • Civil Engineering - Analysis of multispan beams
    • Three Moment Method
    • Moment Area Method
  • Civil Engineering - Design Theories
    • Stress-strain relationship for different materials
    • Design philosophies
Chemical Engineering - Fundamentals of Chemical Engineering
  • Chemical Engineering - Revision
    • Process classifications
    • Material balance fundamental
    • Density of mixtures
    • Ideal gas
Chemical Engineering and Plant Design
  • Chemical Engineering - I and II Laws of thermodynamics
    • Applications to pumps
    • Turbines and compressors
    • Practical problems
    • Vapor - liquid equilibrium
    • Chemical equilibrium
  • Chemical Engineering - Fluid Flow
    • Fluid pressure
    • Continuity equation
    • Volume and velocity
    • Laminar and turbulent flows
    • Reynolds number
    • Friction factor and Pressure drop
    • Bernoulli’s equation
  • Chemical Engineering - Convection and Radiation
    • Convection mechanism
    • Overall heat transfer coefficient
    • Dimensionless numbers
    • Heat transfer correlations
    • Problems on convection
    • Radiation - heat transfer equation
    • Emissivity
    • Problems on Radiations
  • Chemical Engineering - Materials
    • Piping Materials
Mechanical Engineering - Principles and Technology
  • Mechanical Engineering - Failure Mechanisms
    • Common failure of modes of materials: Fracture, fatigue, creep and corrosion
  • Mechanical Engineering - Vibration measurement and condition monitoring tool
    • Vibration measurement: sensors, analysers and interpretation
    • Use of vibration as a condition monitoring tool
    • Troubleshooting and correcting unwanted vibrations
  • Mechanical Engineering - Metal Production and Heat treatment
    • Thermal cycles
    • Heat exchangers: Types, maintenance and troubleshooting
    • Heat pumps
    • Air conditioning
    • Heat: Conduction, convection and radiation
  • Mechanical Engineering - Electric motors
Electrical Engineering - Applied Electrical Engineering
  • Electrical Engineering - Series and Parallel circuits
    • Single path circuits
    • Characteristics of series circuits
    • Closed circuit
    • Open circuit
    • Short circuit
    • Voltage divider
    • Exercise
  • Electrical Engineering - RC and RL circuits
    • RC circuits – charging
    • RL circuits
  • Electrical Engineering - Electrical phase
    • Single phase waveform
    • Period & Frequency
    • Peak-peak value
    • Root mean square value
    • Vectors in the Cartesian plane
  • Electrical Engineering - Power factor analysis
    • Ohm's law in AC
    • Real power
    • Reactive power
    • Apparent power
    • Power components
    • Power factors & improvements
    • Power factor corrections with example
  • Electrical Engineering - 3 phase voltages and Phasors Y system
    • Power system loads
    • Balance three-phase voltages
    • Three-phase voltage source
    • Phasor – Y system
    • Line to line & line to voltage – Y system
    • Line to line and line to netural voltages – Y system
Electrical Engineering - Electrotechnology
  • Electrical Engineering - Fourier series Saw tooth wave
    • Periodic functions
    • Fourier series
    • Fourier series – Saw tooth wave
  • Electrical Engineering - Filters
    • Signal attenuation
    • Basic filter types
  • Electrical Engineering - DC Generators
    • Principle
    • Magnetization curve
    • DC machine construction
    • Types
  • Electrical Engineering - Induction Motor and Generator
    • Speed of AC Induction Motor
    • Actual Rotor Speed
    • Rotor Slip
    • Induction Generator Principle
    • Induction Generator Performance
  • Electrical Engineering - Synchronous motors and Generator reactance
    • Starting of synchronous motors
    • Generator impedance
    • Conversion of reactance
    • Calculation of Impedance and Fault current
Electrical Engineering - Fundamentals of Digital and Analog Electronics
  • Electrical Engineering - Diode and its types
    • Diode
    • Signal diode
    • Freewheel diode
    • Zener diode applications
    • Light emitting diode
    • Applications of LEDs
    • Photo diode
    • Protection diode
    • Fly back diode
  • Electrical Engineering - Rectifiers and Opto-couplers
    • Half wave rectification
    • Full wave Bridge/Center tap rectification
    • Rectifier output smoothing
    • Optocoupler and its types
  • Electrical Engineering - Transistor Model and Parameter
    • Gummel-Poon Model
    • Ebers-moll model
    • Transistor Parameters
    • NPN and PNP
  • Electrical Engineering - Power Transistors
    • Steady state characteristics
    • NPN power transistors
    • Active transistor constant current source
    • Transistor as switch
    • Digital logic transistor switch
  • Electrical Engineering - Darlington pair
    • Introduction
    • Darlington Transistor Applications
  • Electrical Engineering - Load Line Analysis
    • Input load line
    • Output load line
    • Solution
    • Example
    • Small signal equivalent
  • Electrical Engineering - Number System
    • PLD vs VHDL
    • Decimal to Binary Conversion
    • Octal to Decimal Conversion
    • Octal to Binary Conversion
    • Binary to Octal Conversion
    • Binary to Hex Conversion
    • Hex to Binary Conversion
    • Hex to Decimal Conversion
  • Electrical Engineering - Logic Gates and Boolean Algebra
    • Inverters, Buffers, Open –Collector outputs and Fan-out
    • OR, NOR, AND, NAND, Ex-OR and EX-NOR
    • Laws and rules of Boolean Algebra
    • Truth tables
    • Karnaugh maps
    • PALs and GALs
  • Electrical Engineering - Adders and Comparators
    • Half adder
    • Full adder
    • Parallel binary adders
    • Comparators
    • 2-bit Comparators
    • Decoder and Encoder
    • 4-bit decoder
    • BCD to decimal decoder
    • Decimal to BCD Encoder
    • BCD to Binary conversion
    • Binary to grey and Grey to Binary
  • Electrical Engineering - Decoder and Encoder
  • Electrical Engineering - Multiplexer and Demultiplexer
    • 1-of-4 mutliplexer
    • 74LS151 8-Input Data Selector
    • 1-4-line Demultiplexer
    • 74HC154 Demultiplexer
    • Parity generators/checkers
    • 74LS280 9-bit parity generator/checker
  • Electrical Engineering - Latches
    • SR Latch
    • Set operation
    • Reset operation
    • 74LS279 Set-Reset Latch
    • D Latch
    • 74LS75 D-Latch
  • Electrical Engineering - Flip flops
    • Edge triggered flip-flops
    • Edge triggered SR flip-flops, D flip-flops and JK flip-flops
    • Master slave flip-flops
  • Electrical Engineering - Shift registers and Memory devices
    • Serial in/ Parallel out shift registers
    • Parallel in/ Serial out shift registers
    • Parallel in/ Parallel out shift registers
    • Static and Dynamic RAM
    • ROM, PROM and EPROM
    • Flash Memory
    • Magnetic storage
    • Optical storage
    • CPU and Memory
Electrical Engineering - Mechatronics and Remote Engineering - Computing
  • Electrical Engineering - AUTOCAD 3D Drawing
    • Wireframe modeling
    • Solid modeling
  • Electrical Engineering - Components of a Virtual Instrument
    • Virtual Instruments
    • Controls and function palettes
    • Tips for working in Labview
  • Electrical Engineering - Data Acquisition
    • DAQ – Data acquisition
    • Data acquisition terminology
    • Hardware connections
  • Electrical Engineering - Loops and Charts
    • For loop
    • While loop
    • Charts
  • Electrical Engineering - Arrays and File IO
    • Adding an array
    • Creating an array with a loop
    • Creating 2D arrays
    • File I/O examples
  • Electrical Engineering - Simulations with NI Multisim
    • Placing components
    • Taking simple measurements
    • Setting inductor values
    • Simulation on Multisim
    • Examples
  • Electrical Engineering - PCB Preparation
    • PCB Applications
    • System specification
    • System block diagram
    • PCB design process
    • PCB design flow
  • Electrical Engineering - Basic Concepts
    • What is MATLAB?
    • MATLAB functionality
    • User Interface
    • Workspace
    • MATLAB Variables
    • Vector and Matrices
    • Complex valued numbers
Electrical Engineering - Mechatronics and Remote Engineering - Robot Mechanics
  • Electrical Engineering - Moment arms
    • Force
    • Moment
    • Moment arm for robot
    • Degree of freedom of robots
    • Joints of robots
  • Electrical Engineering - Static and dynamic function
    • Types of friction
    • Static and dynamic friction
    • Friction dependencies in robot joints
  • Electrical Engineering - Displacement and Velocity
    • Introduction
    • Linear displacement

Compare this course with other similar courses
See all