Course in ICND2

In Bangalore

Price on request
You can also call the Study Centre
80421... More
Want to speak to an Advisor about this course?
Students that were interested in this course also looked at...
See all

Important information

  • Course
  • Bangalore

Important information

Where and when

Starts Location
On request
#70/1, 2nd Floor, Dr.Brownamma Towers 2nd Cross, Mission Road, CSI Compund, Opp: HCG Hospital, 560027, Karnataka, India
See map

Course programme

This hands-on Cisco course builds from the ICND 1 course and provides students with a technical knowledge for the rest of the Authorized Cisco curriculum. This course will provide the entire information which is needed to pass the CCNA certification exams.

Course Content:

Module 1: Small Network Implementation

Lesson 1: Introducing the Review Lab

Module 2: Medium-Sized Switched Network Construction

Lesson 1: Implementing VLANs and Trunks

* Define the purpose and function of VTP on Cisco Catalyst switches
* List the steps required to configured a normal-range VLAN that uses VTP and 802.1Q trunking

Lesson 2: Improving Performance with Spanning Tree

* Describe the methods that are used to create fast physical connections between switches in a redundant topology
* Identify the potential issues of a redundant switched topology

Lesson 3: Routing Between VLANs

* Describe the purpose of subinterfaces for inter-VLAN routing
* Configure inter-VLAN routing using 802.1Q and an external router

Lesson 4: Securing the Expanded Network

* Describe the security needs of the expanded network and the characteristics of an organizational security policy
* Describe how to secure switch devices, including securing access to the switch

Lesson 5: Troubleshooting Switched Networks

* Identify and resolve VLAN and trunking issues
* Identify and resolve VTP issues
* Identify and resolve STP issues

Module 3: Medium-Sized Routed Network Construction

Lesson 1: Reviewing Routing Operations

* Describe the purpose and types of dynamic routing protocols
* Describe the operation and implementation of distance vector routing protocols
* Describe the operation and implementation of link-state routing protocols

Lesson 2: Implementing VLSM

* Review subnet mask calculation
* Describe the purpose of a VLSM and calculate VLSM
* Describe the route summarization process and how routers manage route summarization

Module 4: Single-Area OSPF Implementation

Lesson 1: Implementing OSPF

* Describe the features of OSPF
* Describe how OSPF neighbor adjacencies are established
* Describe the SPF algorithm that OSPF uses
* Configure a single-area OSPF network
* Configure a loopback interface to be used as the router ID
* Verify a single-area OSPF network configuration
* Use the OSPF debug commands to troubleshoot OSPF
* Configure load balancing with OSPF
* Configure authentication for OSPF

Lesson 2: Troubleshooting OSPF

* Describe the basic components of OSPF troubleshooting
* Identify and resolve errors with OSPF neighbor adjacencies
* Identify and resolve errors with OSPF routing tables
* Identify and resolve authentication problems

Module 5: EIGRP Implementation

Lesson 1: Implementing EIGRP

* Describe the features of EIGRP
* Configure and verify EIGRP
* Configure load balancing with EIGRP
* Configure MD5 authentication with EIGRP

Lesson 2: Troubleshooting EIGRP

* Describe the basic components of troubleshooting a network that is running EIGRP
* Identify and resolve EIGRP neighbor relationship issues
* Identify and resolve EIGRP routing table issues
* Identify and resolve EIGRP authentication

Module 6: Access Control Lists

Lesson 1: Introducing ACL Operation

* Explain the purpose of ACLs and give examples of when to use them
* Explain how inbound and outbound ACLs operate
* Describe numbered and named, standard and extended IPv4 ACLs
* Describe time-based, reflexive, and dynamic extended ACLs
* Use wildcard masking to create IPv4 ACLs

Lesson 2: Configuring and Troubleshooting ACLs

* Configure and verify numbered standard IPv4 ACLs
* Configure and verify numbered extended IPv4 ACLs
* Configure and verify both standard and extended named IPv4 ACLs
* Identify and resolve common ACL configuration errors

Module 7: Address Space Management

Lesson 1: Scaling the Network with NAT and PAT

* Describe the features and benefits of NAT and PAT
* Describe how to translate inside source addresses by using static and dynamic translation and configure NAT
* Configure PAT by overloading an inside global address
* Identify and resolve issues with the NAT translation table
* Identify and resolve issues with using the correct translation entry

Lesson 2: Transitioning to IPv6

* Explain the need for IPv6
* Describe the format of the IPv6 address
* Explain the methods that are used to assign an IPv6 address
* Explain how IPv6 affects common routing protocols and the necessary modifications you need to make to these protocols
* Explain transition strategies for implementing IPv6
* Configure IPv6 with RIPng through an IPv4 network

Module 8: LAN Extension into a WAN

Lesson 1: Introducing VPN Solutions

* Define a VPN
* Define the different types of and uses for VPNs
* Describe the components of VPN
* Describe IPsec and its components
* Describe how encryption, integrity, and authentication are applied to the IPsec protocol suite

Lesson 2: Establishing a Point-to-Point WAN Connection with PPP

* Describe the types of encapsulation that are available on Cisco routers
* Describe the features and functionality of PPP
* Configure and verify PPP

Lesson 3: Establishing a WAN Connection with Frame Relay

* Describe the features and functions of Frame Relay
* Configure Frame Relay
* Verify that Frame Relay is functioning as configured

Lesson 4: Troubleshooting Frame Relay WANs

* Describe the basic steps that are used to troubleshoot a Frame Relay WAN
* Identify and resolve the most common Frame Relay connectivity issues

Achievements for this centre

Students that were interested in this course also looked at...
See all