Fluid Management Operator: Rolling Mills

To be competent, the user/individual on the job must be able to: PC1. Periodically measure all relevant parameters like temperature, level, flow & tank volume of fluid PC2. Take corrective actions to restore the system health PC3. Report issues precisely to supervisor in case the problem is beyond his scope Prepare the right fluid for the purpose and top up where necessary To be competent, the user/individual on the job must be able to: PC4. Transfer from stock the right quality and quantity of fluid and add water of right quality & quantity as per SOP PC5. Based on Tank Volume, top up/transfer to the working tanks Optimally use online systems (e.g. Magnetic separators, Catch pans, Valves, Filter beds etc.) for maintaining fluid quality through filtration To be competent, the user/individual on the job must be able to: PC6. Understand and operate the Magnetic Separators PC7. Operate the filtration units PC8. Operate all other equipment in the fluid system like Steam Valve, Catch pans, heat exchanger etc. Periodically clean the system elements to ensure flow passage is clean and free from contamination To be competent, the user/individual on the job must be able to: PC9. In off-line operation, clean tanks, headers, nozzles, mixers during scheduled shut down, Mill stoppage etc. following SOPs Element A. Organisational Context (Knowledge of the Company/ Organisation and its The user/individual on the job needs to know and understand: KA1. Job specific documents e.g. specification documents of parameters and importance of the same