Implementing Cisco IP Routing (ROUTE)

HBF IT EDUCATION SERVICES
In Bangalore

Price on request
You can also call the Study Centre
80421... More
Compare this course with other similar courses
See all

Important information

  • Certificate
  • Bangalore
  • Duration:
    1 Day
Description

Important information
Venues

Where and when

Starts Location
On request
Bangalore
#70/1, 2nd Floor, Dr.Brownamma Towers 2nd Cross, Mission Road, CSI Compund, Opp: HCG Hospital, 560027, Karnataka, India
See map

Course programme

Detailed Course Outline

Module 1: Planning Routing Services to Requirements Plan and document the configuration and verification of routing protocols and its optimization in enterprise networks.

Lesson 1: Assessing Complex Enterprise Network Requirements This lesson describes the converged network requirements of various network and networked applications within the Cisco network architectures. This will result in the ability to identify information that must be collected when filling out an implementation plan. This ability includes being able to meet these objectives:


Lesson 2: Common Maintenance Processes and Procedures This lesson describes the requirements of the enterprise network, implementation plan and documentation of implementation process, and its results. This ability includes being able to meet these objectives:


Lesson 3: Lab 1-1 Debrief This lesson explains gathering of network requirements and required data. You will be able to create implementation plan, verify, and document the whole process. This ability includes being able to meet these objectives:


Module 2: Implementing an EIGRP based Solution Identify the technologies, components, and metrics of EIGRP to implement and verify EIGRP routing in diverse, large-scale internetworks based on requirements.

Lesson 1: Planning Routing Implementations with EIGRP This lesson describes the components and metrics of EIGRP, how EIGRP selects routes between routers in diverse, large-scale internetworks, the implementation plan creation process, and basic EIGRP configuration.

Lesson 2: Implementing and Verifying Basic EIGRP for the Enterprise LAN Architecture This lesson describes how to verify and implement EIGRP routing.

Lesson 3: Lab 2-1 Debrief This lesson explains how to configure and verify EIGRP operations.

Lesson 4: Configuring and Verifying EIGRP for the Enterprise WAN Architecture This lesson describes, recognizes, and deploys EIGRP operation over various WAN technologies and be able to scale the operation with load balancing and proper bandwidth utilization.

Lesson 5: Lab 2-2 Debrief This lesson explains how to configure and verify EIGRP circuit emulation and Frame Relay operations.

Lesson 6: Implementing and Verifying EIGRP Authentication

Lesson 7: Lab 2-3 Debrief This lesson explains how to configure and verify EIGRP Authentication.

Lesson 8: Advanced EIGRP Features in an Enterprise Network This lesson describes how to implement advanced EIGRP features in an Enterprise Network by applying the planned implementation processes using correct Cisco IOS commands and applications as well as verify that the configuration was correctly implemented.

Lesson 9: Lab 2-4 Debrief This lesson explains how to implement and troubleshoot EIGRP operations to solve EIGRP adjacency and limited connectivity.


Module 3: Implementing a Scalable Multiarea Network OSPF Based Solution Identify, analyze, and match OSPF multiarea routing functions and benefits for routing efficiencies in network operations in order to implement and verify OSPF routing in a complex enterprise network.

Lesson 1: Planning Routing Implementations with OSPF as Scalable Routing Protocol This lesson explains link state protocols, components and metrics of OSPF, how OSPF operates, and the implementation plan creation process.

Lesson 2: How OSPF Packet Processes Work.

Lesson 3: Improving Routing Performance in a Complex Enterprise Network This lesson describes the features of various OSPF network architectures.

Lesson 4: Configuring and Verifying OSPF Routing This lesson explains how to configure OSPF single-area and multiarea routing as well as several advanced features.

Lesson 5: Lab 3-1 Debrief This lesson describes how to implement and verify OSPF to improve routing performance.

Lesson 6: Lab 3-2 Debrief This lesson describes how to implement and verify OSPF multiarea routing. Additionally manipulation of cost, router ID and routing updates is used to optimize the OSPF implementation.

Lesson 7: Configuring and Verifying OSPF Route Summarization This lesson describes the procedure for configuring OSPF route summarization for interarea and external routes.

Lesson 8: Lab 3-3 Debrief This lesson describes how to implement and verify OSPF route summarization for interarea and external routes.

Lesson 9: Configuring and Verifying OSPF Special Area Types This lesson describes how to implement and verify OSPF area parameters, including stub, totally stubby, NSSA, and backbone.

Lesson 10: Lab 3-4 Debrief This lesson describes how to implement and verify OSPF special area types.

Lesson 11: Configuring and Verifying OSPF Authentication This lesson describes how to implement authentication in an OSPF network.

Lesson 12: Lab 3-5 Debrief This lesson describes how to implement and verify OSPF authentication. This ability includes being able to meet these objectives:


Module 4: Implement an IPv4-based Redistribution Solution Implement and verify a redistribution solution in a multi-protocol network that uses IOS features to control path selection and loop free topology according to a given network design and requirements.

Lesson 1: Assessing Network Routing Performance and Security Issues This lesson explains prefix-lists, distribute-lists and route-maps and how to use them to filter and control routing update traffic.

Lesson 2: Operating a Network Using Multiple IP Routing Protocols This lesson explains what route redistribution is and why it may be necessary.

Lesson 3: Configuring and verifying Route Redistribution This lesson explains how to configure route redistribution between multiple IP routing protocols.

Lesson 4: Lab 4-1 Debrief This lesson describes how to configure redistribution between multiple routing protocols as well as implement filtering of routes.

Module 5: Implementing Path Control Evaluate common network performance issues and identify the tools needed to provide a layer 3 path control that uses IOS features to control the path.

Lesson 1: Assessing Path Control Network Performance Issues This lesson explains common network performance issues caused by inefficient path control selection and identify what resources are needed to best provide a path control as well as implementation and verification of PBR.

Lesson 2: Lab 5-1 Debrief This lesson explains destination based forwarding and configures path control using PBR tool.

Lesson 3: References to additional Path Control in E-Learning This lesson explains Preview the E-Learning products to teach creating Path Control through additional methods.

Module 6: Connecting an Enterprise Network to ISP Networks Implement and verify a layer 3 solution using BGP to connect an enterprise network to a service provider. Lesson 1: Planning the Enterprise-to-ISP Connection This lesson justifies the components and methods used to connect an enterprise network to an ISP.

Lesson 2: Advantages of Using BGP This lesson explains how to match BGP functionality to advantages and to the benefits of using BGP to connect an enterprise network to ISPs.

Lesson 3: Comparing the Functions and Uses of EBGP and IBGP This lesson explains how to compare and contrast the requirements for establishing EBGP to IBGP neighbor relationships.

Lesson 4: Configuring and Verifying Basic BGP Operations This lesson explains how to implement BGP operations by receiving an enterprise network and ISP specifications for connection.

Lesson 5: Lab 6-1 Debrief This lesson explains lab topology, configuration of BGP operations, create checkpoints for configuration, and verification, as well as find alternative solutions.

Lesson 6: BGP Attributes and Path Selection Process This lesson explains how to configure and verify BGP operations in a multihomed environment using the BGP attributes and route maps to control the path selection for all BGP routes from the router.

Lesson 7: Lab 6-2 Debrief This lesson explains lab topology, configuring of BGP path manipulation using local preference and MED BGP attributes, creation of checkpoints for configuration, and verification as well as alternative solutions.

Lesson 8: References to Training on IPv6 and Branch Office/Remote Workers in E-Learning This lesson explains Preview the E-Learning products to teach creating Path Control through additional methods. This ability includes being able to meet these objectives:



Compare this course with other similar courses
See all