MIG Welding

PNS College of Engineering
In Thrissur

Price on request
You can also call the Study Centre
93872... More

Important information

Typology Course
Start Thrissur
Duration 1 Day
  • Course
  • Thrissur
  • Duration:
    1 Day

Important information

Where and when

Starts Location
On request
KTES Campus, Chettiparambu, Irinjalakuda.Thrissur, Kerala, India, 680121, Kerala, India
See map
Starts On request
KTES Campus, Chettiparambu, Irinjalakuda.Thrissur, Kerala, India, 680121, Kerala, India
See map

Course programme

MIG torch needle cutaway representation: (1) Torch knob, (2) Shaping phenol dielectric in addition to filament metal nut insert (3) Shielding gas nozzle (4) Contact tip, (5) Nozzle production countenance. MIG is necessary by law in addition to by insurance companies in a lot of localities for structural repair of automotive frames. MIG is also much easier to study in addition to more rapidly to weld. For doing other kinds of soldering, like piece metal, it can be a substance of individual first choice. For an auto body repair shop or a apprentice welder, a MIG is a first-rate, sensible all-around welder. The electrode is fed mechanically through the torch. In gas tungsten arc soldering, the welder must grip a soldering torch in one hand in addition to disconnect filler wire in the other, in addition to in shielded metal arc soldering, the operator must regularly chip off slag in addition to alter soldering electrodes. GMAW, on the other hand, needs only that the operative direct the soldering gun with appropriate location and orientation along the area being welded. An arc is walloped flanked by an unpreserved electrode in addition to the sheet metal to be welded. The unpreserved electrode is in the outward appearance of never-ending filler metal. A motionless gas atmosphere the arc in addition to shields it from the ambient to prevent corrosion. Carbon steels, low alloy steels, stainless steels, mainly aluminum alloys, zinc based copper alloys can be welded using this development. Keeping a dependable call tip-to-work aloofness (the stick out distance) is imperative, for the reason that a extensive stick out detachment can source the electrode to swelter in addition to will also dissipate shielding gas. The compass reading of the gun is also important-it should be detained so as to divide the angle flanked by the occupation pieces; that is, at 45 degrees for a fillet weld in addition to 90 degrees for soldering a flat facade. The travel angle or lead angle is the angle of the torch with admiration to the way of voyage, in addition to it be supposed to commonly stay approximately perpendicular. However, the advantageous slant changes to some extent depending on the category of protecting gas used-with unpolluted motionless gases, the underneath of the torch is out over and over again somewhat in facade of the upper section, at the same time as the contradictory is true when the soldering ambiance is CO2.

Achievements for this centre

Students that were interested in this course also looked at...
See all